|
Rockland, MA (July 17, 2006): GREENGUARD Environmental Institute (GEI) has awarded its Children & Schools Certification to ITW TACC’s high-pressure laminate adhesive, Z Solvent-Free Postformable Adhesive. The product had already achieved GREENGUARD Indoor Air Quality Certified® status, the only contact adhesive to do so. GREENGUARD Children & Schools looks beyond traditional VOCs and verifies low-emissions of phthalates and other hazardous chemicals that can off-gas from some building products and potentially affect the health of building occupants.
| ITW
TACC Z
Solvent-Free Postformable Adhesives |
| |
|
 |
Lets you bond HPL, decorative metals, phenolic-backed veneers and many other materials efficiently, effectively and profitably. Z combines neoprene bond strength with regulatory compliance, so you can say “good-bye†to quality problems and safety issues all at once. And with the Z Solvent-Free Postformable Adhesive Canister System you can reduce adhesive equipment hassles and focus on doing what your business does best. |
| |
|
| ITW TACC Conbond C357 |
| |
|
 |
A non-flammable, VOC Free, neoprene-based contact adhesive developed for bonding high pressure laminate to particleboard. This high efficiency product provides excellent initial and ultimate bond strengths at coating weights currently used with solvent based adhesives. Exceptional heat resistance and aggressive strength make this adhesive ideal for post-forming operations.
This water borne adhesive has been specially formulated for those operations looking to reduce the cost and time of drying conventional water borne adhesives. Using C357 at the recommended coating weights can dramatically improve the efficiency of your drying stage. |
| |
|
| ITW TACC STA™-PUT S162 |
| |
|
 |
A non-flammable, VOC Free, neoprene-based contact adhesive developed for bonding high pressure laminate to particleboard. This high efficiency product provides excellent initial and ultimate bond strengths at coating weights currently used with solvent based adhesives. Exceptional heat resistance and aggressive strength make this adhesive ideal for post-forming operations.
This water borne adhesive has been specially formulated for those operations looking to reduce the cost and time of drying conventional water borne adhesives. Using STA™-PUT S162 at the recommended coating weights can dramatically improve the efficiency of your drying stage. |
| |
|
| ITW TACC T357 |
| |
|
 |
A non-flammable, VOC Free, neoprene-based contact adhesive developed for bonding high pressure laminate to particleboard. This high efficiency product provides excellent initial and ultimate bond strengths at coating weights currently used with solvent based adhesives. Exceptional heat resistance andaggressive strength make this adhesive ideal for post-forming operations.
This water borne adhesive has been specially formulated for those operations looking to reduce the cost and time of drying conventional water borne adhesives. Using T357 at the recommended coating weights can dramatically improve the efficiency of your drying stage. |
|
