Chem Link Adhesives

  logo_header_chemlink.png

  BuildSecure

BuildSecure is specially designed for bonding most construction materials: A fest setting, structural adhesive designed for various “panel on frame” assemblies in commercial and residential construction.  Has been certified by Akron Laboratories to pass AFG-01 testing and therefore complies with HUD UM 60 and ASTM D-3498 specifications for bonding subfloor construction.  Can achieve wood tearing bonds in less than four hours at 72°F.  The speed of set and ultimate shear strength make this product ideal for shear wall construction and roof assemblies in a production setting where timing is of critical importance.  The “green strength” and ultimate 500+ PSI shear strength of this adhesive permits floor decks, shearwalls, and roof assemblies to be bonded to each other, forming a rigid “airframe” type construction with strength in all directions.  BuildSecure is 100% solids and therefore capable of filling gaps and forming bonds on irregular surfaces without shrinking.  BuildSecure is a solvent free, nonflammable, moisture curing adhesive that complies with all OSHA, State, Local, and Federal air quality regulations.  This adhesive is non-carcinogenic and complies with California Proposition 65.

REGULATORY COMPLIANCE:

»AFG-01 & HUD UM60a
»ASTM D 3498
»Conforms to OTC Rule for Adhesives
»Meets requirements for California regulations: CARB, SCAQMD, & BAAQMD
»Conforms to California Proposition 65
»Conforms to USDA requirements for non-food contact.
»LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
»NAHB Model Green Home Building Guidelines: 5 Global Impact Points
»VOC Content at 240°F: Less than 19 grams/liter (including water), ASTM D2369, EPA Method 24

  • high-solids
  • solvent-free
  • odorless
  • fast-setting
  • polyether green adhesive

minimum order: $250

Available in:

  • 24 - 10.1 oz. cartridges per carton, 45 cartons per pallet
  • 2 gallon pails, 60 pails per pallet (Special order only)
  • 12 - 20 oz. sausages per carton, 60 cartons per pallet (Special order only)
  • 12 - 28 oz. cartridges per carton, 40 cartons per pallet
  • 3.5 gallon pails, 48 pails per pallet. (Special order only)
  • 24 - 4 oz. squeeze tubes per carton, 94 cartons per pallet (Special order only)
  • 5 gallon pails, 36 pails per pallet (Special order only)
 
  CLEAR

CLEAR is a formula for use in virtually any high visibility sealing application. Clear is a moisture curing, polyether sealant designed for application in damp, dry, or cold climates.  Clear is solvent free and contains no isocyanates.  Clear will not shrink upon curing, will not discolor when exposed to UV light, and cannot “outgas” or bubble on damp surfaces as urethane sealants often do.  Clear has resilient “elastomeric” properties and excellent adhesive to most construction materials.  Clear is capable of joint movement in excess of 25% in both compression and extension.  Clear can be used effectively in many difficult construction site conditions cures and in wet or dry climate conditions and at low temperatures (30°F).  Clear is one of the very clearest products on the market today.

APPLICABLE PERFORMANCE STANDARDS:

»ASTM C-920, Type S, Grade NS, Class 25, Uses NT, T, M, G, A, & O
»Federal Specification TT-S-00230-C Type II, Class A
»Corps of Engineers CRD-C-541, Type II, Class A
»Canadian Standards Board CAN 19, 13-M82

REGULATORY COMPLIANCE:

»Conforms to OTC Rule for Sealants & Caulks
»Meets requirements for California Regulations CARB and SCAQMD
»Conforms to California Proposition 65
»Conforms to USDA Requirements for non-food contact
»LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
»NAHB Model Green Home Building Guidelines: 5 Global Impact Points
»VOC Content at 240°F: Less than 14 grams/liter (including water), ASTM D2369, EPA Method 24

  • high quality
  • green
  • moisture curing
  • elastomeric polyether

minimum order: $250

Available in:

  • 24 - 10.1 oz. cartridges per carton, 45 cartons per pallet
 
  NovaLink

NovaLink is for use in both moving and non moving joints. NovaLink is a moisture curing, polyether sealant designed for application in damp, dry, or cold climates.  NovaLink is solvent free and contains no isocyanates.  NovaLink will not shrink upon curing, will not discolor when exposed to UV light, and cannot “outgas” or bubble on damp surfaces as urethane sealants often do.  NovaLink has excellent adhesive to most construction materials and resilient “elastomeric” properties.  NovaLink is capable of joint movement in excess of 25% compression and extension.  Because it cures in wet or dry climate conditions, and at low temperatures (30°F), NovaLink can be used effectively in many difficult construction site conditions.

APPLICABLE PERFORMANCE STANDARDS:

»ASTM C-920, Type S, Grade NS, Class 25, Uses NT, T, M, G, A, & O
»Federal Specification TT-S-00230-C Type II, Class A
»Corps of Engineers CRD-C-541, Type II, Class A
»Canadian Standards Board CAN 19, 13-M82
»SRW Institute Validated (Sealant Waterproofing and Restoration)

REGULATORY COMPLIANCE:

»Conforms to OTC Rule for Sealants & Caulks
»Meets requirements for California Regulations CARB and SCAQMD
»Conforms to California Proposition 65
»Conforms to USDA Requirements for non-food contact
»LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
»NAHB Model Green Home Building Guidelines: 5 Global Impact Points
»VOC Content at 240°F: Less than 19 grams/liter (including water), ASTM D2369, EPA Method 24

  • high performance
  • green
  • polyether
  • interior/exterior joint sealant
  • available in 12 colors

minimum order: $250

Available in:

  • 24 - 10.1 oz. cartridges per carton, 45 cartons per pallet
  • 16 - 10.1 oz. cartridges per field pack, 48 field packs per pallet (Special order only)
  • 2 gallon pail, 60 pails per pallet. (Special order only)
  • 12 - 20 oz. sausages per carton, 60 cartons per pallet (Special order only)
  • 12 - 28 oz. cartridges per carton, 40 cartons per pallet (Special order only)
  • 5 gallon pail, 36 pails per pallet (Special order only) 
 
  DuraLink

DuraLink Super Adhesion Sealant is green and designed to adhere and seal most construction substrates including KYNAR coated metal! DuraLink is an extremely elastic moisture curing sealant designed for use in metal architecture, curtain wall construction, and joints subject to movement.  DuraLink’s adhesion to difficult surfaces permits its use on anodized metal, and coatings such as Kynar 500 PVDF. DuraLink will not stain limestone, marble, or other absorbent stone substrates.  DuraLink’s unique polyether chemistry eliminates outgassing on green concrete and “suntanning” or discoloration after exposure to ultraviolet light.  

APPLICABLE PERFORMANCE STANDARDS:

»ASTM C-920, Type S, Grade NS, Class 25, Uses NT, T, M, G, A, & O
»Federal Specification TT-S-00230-C Type II, Class A
»Corps of Engineers CRD-C-541, Type II, Class A
»Canadian Standards Board CAN 19, 13-M82
»SRW Institute Validated (Sealant Waterproofing and Restoration)

REGULATORY COMPLIANCE:

»Conforms to OTC Rule for Sealants & Caulks
»Meets requirements for California Regulations CARB and SCAQMD
»Conforms to California Proposition 65
»Conforms to USDA Requirements for non-food contact
»LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
»NAHB Model Green Home Building Guidelines: 5 Global Impact Points
»VOC Content at 240°F: Less than 19 grams/liter (including water), ASTM D2369, EPA Method 24

Minimum order: $250

Available in 12 colors. Available in:

  • 24 - 10.1 oz. cartridges per carton, 45 cartons per pallet
  • 16 - 10.1 oz. cartridges per field pack, 48 field packs per pallet
  • 24 - 10.1 oz. foil fiber cartridges per carton, 45 cartons per pallet (Special order only)
  • 2 gallon pails, 60 pails per pallet (Special order only)
  • 12 - 20 oz. sausages per carton, 60 cartons per pallet (Special order only)
  • 5 gallon pails, 36 pails per pallet (Special order only)
 
Next >
10% discount off first order
American Chemical Logo
Glueit Logo  Acme Glue Logo
AMERICAN CHEMICAL, INC. • 2201 NORTH 2ND STREET • MINNEAPOLIS, MN 55411
1.800.2.GLUEIT • 612.529.8645 (FAX)